Commit df8eb569 authored by Soren Brinkmann's avatar Soren Brinkmann Committed by Wolfram Sang
Browse files

i2c: Add driver for Cadence I2C controller



Add a driver for the Cadence I2C controller. This controller is for
example found in Xilinx Zynq.

Signed-off-by: default avatarSoren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: default avatarMichal Simek <michal.simek@xilinx.com>
Reviewed-by: default avatarHarini Katakam <harinik@xilinx.com>
Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
parent 893f0677
......@@ -1402,6 +1402,7 @@ F: drivers/cpuidle/cpuidle-zynq.c
N: zynq
N: xilinx
F: drivers/clocksource/cadence_ttc_timer.c
F: drivers/i2c/busses/i2c-cadence.c
F: drivers/mmc/host/sdhci-of-arasan.c
ARM SMMU DRIVER
......
......@@ -376,6 +376,13 @@ config I2C_BLACKFIN_TWI_CLK_KHZ
help
The unit of the TWI clock is kHz.
config I2C_CADENCE
tristate "Cadence I2C Controller"
depends on COMMON_CLK
help
Say yes here to select Cadence I2C Host Controller. This controller is
e.g. used by Xilinx Zynq.
config I2C_CBUS_GPIO
tristate "CBUS I2C driver"
depends on GPIOLIB
......
......@@ -33,6 +33,7 @@ obj-$(CONFIG_I2C_AT91) += i2c-at91.o
obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
obj-$(CONFIG_I2C_BCM2835) += i2c-bcm2835.o
obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o
obj-$(CONFIG_I2C_CADENCE) += i2c-cadence.o
obj-$(CONFIG_I2C_CBUS_GPIO) += i2c-cbus-gpio.o
obj-$(CONFIG_I2C_CPM) += i2c-cpm.o
obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o
......
This diff is collapsed.
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment